background image

Chapter  1  Introduction 

1.1 The Introduction   

Thank you for purchasing 431R router. 431R is the first true wireless access router, supports WIFI and 

Ethernet gateway in one device. It offers wireless broadband WAN HSUPA connection with data rate up to 

7.2Mbps. On Local area Network (LAN), it supports both the wireless WIFI 802.11b/g and wire Ethernet 

10/100Mbps interfaces. It is designed with Easy-to-use compact. You can connect the Internet by WAN port, 

or insert the service provider SIM card by built-in the HSUPA wireless module. 

1.2 Features 

z

 

Built-in the HSUPA wireless module, just insert the service provider SIM card. 

z

 High-speed 

data 

connections 

with rate up to 7.2Mbps 

z

 

NAT & NAPT with VPN pass-through Virtual Server 

z

 

Automatic receipt of IP address with DHCP server 

z

 

5 LED Indicator x 5(PWR,3G,WIFI,WAN & LAN) 

z

  Browser-based configuration   

z

 

Access Control to manage users 

z

 User-friendly 

configuration 

and diagnostic utilities   

z

 

Industry-leading firewall security 

z

 

Supports 802.11b/g,Frequency from 2.4GHz to 2.483GHz, Access Points, Routers and Gateway 

Server Applications      

               

 

Chapter  2   Product Overview 

2.1 The Front Panel 

 

The Router’s LEDs are located on the front panel(View from left to right). 

 

Summary of Contents for 3G-431R































Reviews: