Blake UK PROAPE900 Setup Manual Download

Page: 1 / 13

Set

up Guide (24v OUTDOOR CPE)

CPE The Bridge

Press F Key to enter setup mode

means Host/Master AP

means Client/Slave AP

Press S Key & Set One unit to
Host (

) and the other to Client

(

) choose the same channel on

both units

Showing

Signal Strength

Showing

IP Address

Outdoor CPE/Bridge with LED display, High power industrial 5G outdoor CPE/Bridge with the next generation 802.11ac

Fi standard, 802.11 ac/b/g/n 5 GHz 900 Mbps, MIMO 15dBi Dual Polarized High Gain Antenna, 500mW RF Power,

Multi

Mode, Support Multi SSID up to 4, PTP/PTMP, 5KM+ Distance Coverage. 802.11ac Wi

Fi and 2*2 MIMO technology,

900Mbps wireless speed. Equipped with Gigabit Ethernet port ensures high speed internet access and more end users

access.

4 in 1 Operation Mode Wireless AP, Gateway, Wireless Bridge & Super WDS, Supports HI

MAX TDMA Technology, Sup-

port Multi SSID up to 4, Support Beamforming Technology, MIMO High Gain Omni 15dBi Internal Antenna, 802.11ac,

2T2R 900M MIMO Technology, 8MB Flash, 64M DDR2 RAM,

Supports 24V Passive PoE

Summary of Contents for PROAPE900














Search results

Summary of Contents for PROAPE900

Reviews:

Related manuals for PROAPE900

Brands by name

Popular brands

Blake UK PROAPE900, Setup Manual

Search results

Summary of Contents for PROAPE900

Reviews:

Related manuals for PROAPE900

Brands by name

Popular brands