SOLUXTEC PowerSlate Mono Pure Glass Series, User Manual

Page: 4 / 14

SOLUXTEC GmbH Page 4 of 14 version 1.4 - January 2014
2. Basic safety instructions
Risk of death by electric shock!

Solar modules create electricity and are
even energized under a slight illumination
level. A series connection of modules leads to an accumulation of voltage. A parallel
connection addition leads to an accumulation of current. The wiring of several
modules to a generator control panel is only to be handled by authorized specialized
staff.
 The network plug of the photovoltaic-panel has to be handled by a franchised certified
electrician.
 During the assembly and handling of the photovoltaic-plant, all local legal norms,
technical building regulations and accident safety regulations, especially concerning
activity on the roof have to be kept.
 The safety instructions of all plant components as well as all regulations of the
respective energy provider to the grid feeding operation of the PV-plant are to be
considered.
 Also during low temperatures the maximum admissible open circuit voltage of the
modules must not be exceeded.
 Never open the junction box of the photovoltaic module.
 Only use inspected safety equipment and tools for the installation.

Risk of death by electric arc!
The solar modules have to be disconnected
through DC switch before the beginning of any operation on any current-carrying
party of the photovoltaic-plant.
 Do never disconnect the solar power generator from the inverter or the assembly of
the solar modules under load current. First turn off the DC switch.
 Please protect the panel, plug and jack against damage or dirt contamination.
 Do not establish a connection with dirty or wet plugs or jacks.
 The tools that you use for the installation have to be dry.
 Examine all tools for damage before the installation.
 Do never introduce conductive parts in the connection box and joining pieces and
never try to touch the plugs on the inside.
 Do not modify or decompose the solar panel. And do not remove any from the
manufacturer attached notices or type plates.
 Avoid any contact of the PV-element with metal parts.