Manual FRAME-EVO-E20
Version 1.6
21.01.2019
Page
4
of
39
1.2 Tools required
The only tool required is a 4 mm hex key to mount the projector in the FRAME-EVO-E20.
These installation instructions must always be handed over to the installing person
1
Read these instructions carefully before installing the system.
Copyright © 2018 LANG AG. All rights reserved.
2. Safety instructions
INTENDED USE
The FRAME-EVO-E20 frame is intended for use by fully qualified, trained and competent
persons to provide safe and secure transportation, installation and adjustment of
projectors.
Only use the frame with projector in a closed environment (conference rooms, theaters,
convention halls, etc.) where there is no wind, moisture, excessive heat etc.
Make sure that only the corresponding projectors are installed in this frame! Do not try to
use it with other projectors because serious accidents can occur!
1
Only a qualified person should install this product
4 mm hex key (Allen key)
