3.6
-
Keep the equipment out of the reach of children.
3.7
-
Do not cover the equipment during its operation.
3.8
-
Do not insert any objects through the ozone outlet grilles, as this may cause equipment
malfunctions or short
-
circuits.
3.9
-
Clean the equipment with a clean, dry cloth. Do not use abrasive products.
3.10
-
Do not open the equipment
-
High Voltage inside.
Problems / Faults
Warranty
4.1
-
This equipment has a free 2 years warranty period, if the equipment fails in normal use,
according to the manual instructions (determined by the company). To activate it, you must
present the invoice and the warranty card.
4.2
-
The warranty applies to the Ozone Generator System. Consumables such are not
covered by the warranty (check valve, silicone tube, venturi).
4.3
-
During the warranty period, the following conditions are not covered:
-
Does not present the warranty card and invoice;
-
Failures and damages caused by improper use or improper repairs;
-
Failures and damages caused by transport and fall;
-
Failures and damages caused by other external factors, natural disasters or other human
factors;
-
Failures and damage caused by water or other types of solutions on the equipment;
-
Failures and damages caused by the use of energy or voltage other than those specified;
-
Failures by different use from what is specified in this manual;
-
Damaged or missing Warranty Seal;
-
Signs of attempting to open the equipment.
7
Problem / Failure
Possible Causes
To DO
The Ozone Generator
does not turn on
Generator without power
supply
Check that the power is working
properly.
Blown Generator Fuse
Replace the fuse.
SPA without ozone
Damaged check valve
Replace the check valve.
Silicone tubing damaged with
ozone leakage
Replace system silicone tubing.
Table 3
-
Fault Identification
SSO
-
O3
-
SPA01
-
User Manual (EN)
..
EN
Copyright @ 2020 Ozone Solution. All rights reserved. This document accompanies the O
3
System for SPAs. This document is subject to review.
Merely illustrative images.
Ver2/01
-
Ver.02