10
5. Product Installation
5-1 Gateway
- Components (includes installation accessories – adapter, bracket, screws)
Installation
a) Drill 4 holes on the wall or ceiling to align with mounting Plates (1). Refer to the attached
diagram.
b) Drill two Ф10 holes on the wall or ceiling for SMPS Adapter and Ethernet Cable.(2) Refer to
the attached diagram.
c) Align the mounting bracket#2 holes to the holes drilled through the wall or ceiling from step a)
and temporarily secure the bracket in place. (3)
d) Use Screws to completely secure the mounting bracket and Wall or Ceiling. (4)
e) Sliding gateway to mounting bracket#2 (5)
f) SMPS Adapter and Ethernet Cable through the two Ф10 holes made from step b).
Gypsum
board
Plate
Screw (4ea)
Bracket#2
1)
Mounting Plate
2)
Drilling hole
for ADT,LAN cable
3)
Attach Bracket#2
4)
Screw
5)
Sliding Gateway
