9
8
① Call button
Name of each section (Bell)
Battery replacement instruction
It is strongly advised to use specified battery type compliant with
international standards. (CR2032 3V coin type lithium battery)
※ Color of the Bell may vary with different models.
F0
New call number registration mode
Adds new call number to the list of registered call numbers.
F1
Sound setting mode
Sets bell sound for all Bells. (22 bell sounds / default value is 1)
F2
Display time setting mode
Sets display duration. (default value is 30 seconds)
F3
Ring repetition setting mode
Sets ring repetition number. (default value is 1)
F4
Unique Bell sound setting mode
Sets bell sound for individual Bells
F5
Call redundancy interval setting mode
Sets interval for redundant calls (default value is 3 seconds)
F6
Call number changing mode
Assigns different call number for the Bell.
F7
Call number deleting mode using the Bell
Deletes call number from the list using the Bell
F8
All Call number deleting mode
Deletes all call number on the registered call number list
F9
Call number deleting mode using the Main unit
Deletes call number from the list using the main Unit.
E1
New call number sequence registration mode
Sequential registration call number.
Upper side
Bottom
① Unscrew the screws at the back of the Bell to remove the lid.
② Place the battery into a holding bracket with + sign at the top.
③ Close the lid and screw the screws.
List of setting modes for Main transceiver
Each setting mode below is activated with using Setting buttons.