29
LOCATION OF GAS POINT AND ELECTRICAL SUPPLY
VENTILATION REQUIREMENTS
A suitable ventilation hood may be installed above your
freestanding oven. InAlto has a wide range of ventilation
hoods designed to match the rest of our kitchen
appliance family. See www.inalto.house or your local
retailer for
more details.
IMPORTANT!
Consult local building codes and/or local
agencies, before starting, to ensure that your hood and
duct installation will meet local requirements.
Hood blower speeds should be variable to reduce noise
and loss of heated or air-conditioned household air
when maximum ventilation is not required. Normally, the
maximum blower speed is only required when using the
grill or frying at a high temperature on your gas cooktop.
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted to the base of the
freestanding oven before use. Rest the rear of the
freestanding oven on a piece of the packaging (i.e. the
polystyrene) exposing the base for the fitting of the feet.
IMPORTANT!
Be very careful not to damage the
freestanding oven during this process. Do not have any of
the burners or trivets fitted in place when lying the cooker
backwards. The freestanding oven is heavy- ensure that
you have adequate help.
Fit the four legs by screwing them tight into the support
base as shown below.
Page 23
750
150
900
900
600
Page 23
750
150
900
900
600
Page 24
Page 24