10
Improper storage shortens the life of built-in lithium batteries or causes other hidden dangers. Please keep the
SOLOWHEEL Glide2
in a
dry room at suitable temperature and humidity. If it is not used for a long time, please fully charge its battery at room temperature and
at least once every month later.
3.2. Air Inflation , Inner and Outer Tire Replacement
If the tire pressure is insufficient, please conduct air inflation in time. The factory tire pressure of SOLOWHEEL Glide2 is 2.8Bar by
default.If the tire of SOLOWHEEL Glide2
needs to be replaced due to tire burst or other reasons, contact the dealer authorized by
SOLOWHEEL or
the after-sales service department of SOLOWHEEL for maintenance.
3.3. Pedal Tightness Adjustment
Riders will feel uncomfortable if the pedals of SOLOWHEEL Glide2 become loose, and will even fall under severe condition. If the
pedals are loose, please use a M10 Allen driver and a M6 Allen driver respectively to tighten the screws on the axis and on the side edge of the
axis. Please develop a habit of checking all parts of the
SOLOWHEEL Glide2 before using.
3.4. Precautions for Cleaning and Use
·Before cleaning the SOLOWHEEL Glide2, shut down the body, pull up the charging wire, and close the charging port. During cleaning, make sure
that water does not flow into the battery-charging port.
·Use a soft cloth dipped with soapy water or clean water to scrub the outer cover of the SOLOWHEEL Glide2. Do not use high-pressure
water
jet to flush the SOLOWHEEL Glide2.
·The waterproof and dustproof level of the SOLOWHEEL Glide2 is IP55, which means splash-proof and dustproof. Therefore,
it is not
allowed to dip the
SOLOWHEEL Glide2 in water, which may cause permanent damage to the SOLOWHEEL Glide2.
·Please do not drive the SOLOWHEEL Glide
2
to pass through the deep-water zone (more than 70mm in depth).Please do not
drive in a
rainstorm, so as not to fall down or cause damages to the SOLOWHEEL Glide2 because of soak in the water.
