E
x
12
2
1
E
E
STEP 4
T
Install the abletop
The expansion distance of the
supporting beam can be adjusted
according to the actual use.
Attention: When the supporting beam is greater than 67.7",
the installation method is as follows: Method 2 in Step 6.
Loosen
Adjust
Tighten
6
STEP 5
Install the Control Panel
7
Port for
hand switch
Power port
Port for cable
connected to the
lifting column
B
4
3
B
x
4
STEP 6
Install the Cable
Management
T
ray
Method 1
3
T
ighten
Firstly
with
, rotate the screws (B) incompletely into the supporting beam (4)
Allen Key (F), which means do not tighten them. Next, slide one
side of the cable management tray (3) into the screws (B), then the
other side Finally, tighten the screws (B) with Allen Key (F).
1
Slide one side
2
Buckle the other side
F
0.16"x0.16"
F
0.16"x0.16"
