Solos SD-KStand001-WH Installation Manual Download Page 4

Page: 4 / 4

37mm

3/10”(8mm)

Connect the anti-tip strap to the wall

Expansion pipe

Nail

Reading rack instruction

reading.

STEP

According to the actual use, the reading rack

can be rotated to facilitate comfortable reading.

Open the reading rack to the maximum,

and rotate the reading rack according

to the actual use to facilitate comfortable

Load capacity: 0.5kg

After placing the book, pay attention

to adjusting the screws to avoid

unnecessary injury due to loose

reading rack.

3*3 wrench

Caution

Summary of Contents for SD-KStand001-WH

Page 2: ...hion STEP5 Shelf panel ﬁnal assembly Shelf panel ﬁnal assembly Applicable tabletop thickness 15 30mm Adjust the knob according to the thickness of the tabletop then tighten it STEP6 Connect the anti tip strap to the shelf panel Anti tip strap ...

Page 3: ...plastic block 7 on the shelf 2 with screws C and tighten it with a 5x5 wrench F Place the plastic block slot face up Insert Buckle into Buckle the plastic block 7 into the upper frame 5 and ﬁx it with screws C then to tighten it with a 5x5 wrench F Insert the upper frame 5 into the groove of the plastic block 7 ...

Page 4: ...se the reading rack can be rotated to facilitate comfortable reading Open the reading rack to the maximum and rotate the reading rack according to the actual use to facilitate comfortable Load capacity 0 5kg After placing the book pay attention to adjusting the screws to avoid unnecessary injury due to loose reading rack 3 3 wrench Caution ...