FIXTURE MOUNTING INSTRUCTIONS
1) Prior to installing or servicing this product, disconnect the transformer from the main
power supply.
2) Insert the pigtail wires from the bo om of the
fi
xture through the hole and slot located on
3) Screw
the fi
xture into the moun ng stake hole.
4) Place the
fi
xture/stake in the desired loca on. Insert the stake into the ground in the desired
loca on un
he bo om of the stake head rests on the ground surface.
5) Strip the two
fixtu
re pigtail wires. A
the two
fixtu
re leads to the two main supply cable
leads using the two provided King® DryConn™ waterproof connectors. Using a Phillips head
screwdriver, loosen the screw located in the knuckle. Angle the
fi
xture to the desired posi on
and re ghten the screw.
6) Reconnect the transformer to the main power supply. Turn on the power to the
fi
xture and
verify proper posi on and opera on.
Note: In hard soil, the moun ng stake can be inserted into the ground using a hammer, prior to
a aching the
fi
xture.
LED INSTALLATIONS
Most Halco ProLED PAR 36
lamps have an opera ng voltage range of 10-18 volts AC. Please verify the
lamp’s allowable voltage range listed on the product packaging.
ng ProLED PAR 36
lamps with
voltage greater than its speci
fi
ed range may damage the internal components of the LED and voids the
manufacturer warranty. ProLED lamps maintain light output, full color, and instant start capabil
s to
temperatures down to -20 degrees Celsius. ProLED PAR 36
lamps will operate at the desired light output
with voltage down to the lower listed voltage and up to the higher listed voltage, providing balanced
light output from the
fix
ture located closest to the transformer to
the fi
xture located furthest from the
transformer.
Hood
Main Supply Cable
8" Ground Stake
Wire Slot on
Stake Head
Adjustable Knuckle
King® DryConn™
Connectors
36" Pigtail
Sollos Landscape Ligh ng • 2940 Paci
fic
Drive • Norcross, GA 30071 • 800-677-3334 • www.sollosligh ng.com
