manualshive.com logo in svg

Solorock SRWD-COMBOSTAR-II, Owner'S Manual, Page: 4 / 15

Share
Download
Solorock SRWD-COMBOSTAR-II Owner'S Manual Download Page 4

P.06

P.07

      

-   Cold city water shall be used and hot water may be also connected according to the local
     situations.
-   Your washing machine is only for home use and is only designed for the textiles suitable 
    for machine washing. 
-   Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc. shall
    not be used as detergents. Please only select the detergents suitable for machine 
    washing, especially for front loading .
-   It is forbidden to wash carpets.
-   Be careful of burning when washing machine drains hot washing water.
-   Never refill the water by hand during washing.
-   After the program is completed, please open the door after the bell or disconnect the 
    power supply to the machine.
-   Please remember to disconnect water and power supply immediately after the clothes 
    are washed.
-    Always follow the fabric care instructions recommended by the clothing manufacturer.
-    Do not use the washing machine if it has a worn power cord or loose plug. Contact an 
     authorized service agent.
-   Do not operate the washing machine if any guards, panels and /or fasteners except 
    transport fixing bolts have been removed. Check the fill hose connections on a regular
    basis to ensure that they are tight and not leaking. 
-   Do not operate the washing machine if parts are missing or broken.
-   Do not touch the door if washing at high temperatures.
Note:
-   The Important Safeguards and Warnings indicated in this manual do not cover all 
    possible conditions which may occur. Common sense, caution and care must be 
    exercised when installing, maintaining or operating the washing machine.
-   Always contact your dealer, distribute, service agent or the manufacturer about any
    problems or conditions that you do not understand. 
      
      

    

   Cautions When Washing Clothes

Tools and Parts
    

      

    

Gather the required tools and parts before starting installation. The parts

     supplied are in the washer drum.

INSTALLATION REQUIREMENTS

Transport Hole Plug

1/4 nut driver 3/8socket with ratchet
3/8″ open end wrench
Adjustable wrench or 7/16″ socket with ratchet
Adjustable wrench or 9/16″ open

-

end wrench

Channel

-

lock adjustable pliers

Carpenter’s level

″

″

-

Water Hoses(2)

Cable

 

Tie

       

Warning!

  Failure to comply with these warnings could result in serious 
  personal  injuries.

Note

:

Environmental Protection

 -   If you plan to dispose this machine, please comply with the local waste 
     disposal regulations. Cut off the power cord so that it will not be put into reuse. 
     Remove the door so that kids and animals will not be trapped in the machine. 
 -   Do not use excessive detergents.
 -   Decontaminant and bleacher can be used to pre-treat the stains on the 
     clothes only when very necessary. 

  SAFETY PRECAUTIONS

    Attention shall be paid to protecting the machine

-   Do not climb up and sit on top cover of the machine.
-   Do not lean against machine door.
-   Please do not close the door with excessive forces. If it is found difficult to close the
    door, please check if the excessive clothes are put in or distributed well.

     

Cautions during Handling Machine

-   Transport bolts shall be reinstalled to the machine by a specialized person.
-   The accumulated water shall be drained out of the machine.
-   Handle the machine carefully. Never hold each protruded part on the machine while 
    lifting. Machine door can not be used as the handle during the conveyance.
    

      

 
 

   WARNING – Risk of Fire
Clothes dryer installation must be performed by a qualified installer.
Install the clothes dryer according to the manufacturer’s instructions and local codes.
These conditions will obstruct clothes dryer airflow and increase the risk of

 

fire

.

To reduce the risk of severe injury or death, follow all installation instructions.
Save these instructions.

1.To reduce the risk of fire, this appliance must be fastened or otherwise secured to an 
   uncovered concrete floor. 
2.This machine must be earthed properly. If there is any short circuit, earthing can reduce 
   the danger of electrical shock.
  This machine is equipped with power cord, which includes plug, earthing wire at earthing 
   terminal.
3.Washing machine shall be operated in a circuit separate from other electrical appliances. 
   Otherwise, power protector may be tripped or fuse may be burned out.

！

WARNING

Summary of Contents for SRWD-COMBOSTAR-II
















Reviews:

No comments