ENGLISH
5
Assembly carrying belt
•
Thread the upper loop of the carrying belt (
k
),
through one of the three attachment ribs from
above depending on body size, so that the two
clamping sliders (
l
) are on the outside.
•
Secure the loop with the attachment pin (
m
)
from below.
•
Thread the ends of each carrying belt through
the specified slits in the standing base (
e
).
•
Tighten the belt.
Assembly of the pump lever (
f
):
The pump lever can be attached to the left or right.
•
Push the pump lever into the guide (
n
) at the
standing base (
e
) from the desired side, so that
the pump handle points backwards (next to the
user when the device is carried on the back).
For ergonomic adjustment, the pump lever can
be pushed into the device base to different
degrees so that the distance from the standing
base is between 5 cm and max. 20 cm.
•
When not working, the pump lever can be
pushed into the rear opening (
o
) at the standing
base for space-saving storage.
7.2 Filter and filling screen
The nozzle assembly (
i
) includes a filter (
q
) insert
in front of the nozzle.
The basket in the filling neck (
c
) of the liquid tank
contains a filter screen(
r
).
The nozzle filter and the inlet filler screen must
always be used when working with the backpack
sprayer.
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 2
Summary of Contents for 424 NOVA
Page 2: ......
