2
Without doubt, power interruptions cause major problems for home and business
computing. An unpredictable power supply can lead to worrying problems such as
surges, spikes, lightning strikes, brown-outs, power-cuts (black-outs), power-back
surges, mains over-voltage, and complete failure - all of which can damage electrical
and electronic equipment. If any of these should occur, there’s a strong chance you
will suffer from loss of critical data, lowered productivity and even damage to your
expensive equipment.
Sollatek encompasses a wide range of power protection products for use in many
different industries where clean, regulated mains power is critical to their continued
operation.
For more information on our range of power protection products, contact us now.
SOLLATEK (UK) LTD
UNIT 10 POYLE 14 INDUSTRIAL ESTATE,
NEWLANDS DRIVE, POYLE,
SLOUGH SL3 0DX,
UNITED KINGDOM
Tel: Interna44 1753 688300 National 01753 688300
Fax: Interna44 1753 685306 National 01753 685306
E-mail: [email protected]
www.sollatek.com
The
DSP-D
range offers high capacity protection in industrial applications, ten-mode
protection and a max surge handling capabilities of 80kA, 120kA or 160kA per phase.
Ensuring protection at distribution boards, lighting systems and equipment panels and
cabinets. Featuring; solid-state diagnostics, LED indication of protection level status,
IP66 and UL 1449 rated. International three phase supply versions only.
The
DSP-S
range with ten-mode protection, maximum surge handling capacity of 90kA
per phase, when used in conjunction with a Sollatek DSP-M series at the main service
entrance provides the ultimate in complete high-capacity surge suppression. Requiring
no operator intervention, LED indicators allow each MOV network to be constantly
monitored. Remote monitoring by means of normally closed contacts. IP66 and UL 1449
approved. Single / three phase versions for all international supply voltages.
Designed for main service entrance locations, the
DSP-M
range gives ten-mode
protection, surge max surge current of 150kA or 180kA per phase. Visual or remote
warning alerts the operator of varistor network failure while a redundant unit keeps
protecting the site, even after a direct strike. Silicon avalanche diode versions are
available (DSP-150-SD) incorporating both SAD and MOV technology for a lower limiting
voltage. Remote monitoring by means of normally closed contacts. IP66 and UL 1449
approved. Three phase versions for all international supply voltages.
Contents
Sollatek DSP-D Series
p.3
Sollatek DSP-S Series
p.4
Sollatek DSP-M Series
p.6
Power problems
p.10
Comparison chart
p.11
THE SOLLATEK DISTRIBUTION SURGE PROTECTOR (DSP)
INTRODUCTION