PBH-101 User Manual Ver. 1.2
- 31 -
3.2
Initialization
3.2.1
Level 1
Implementing level 1 initialization, both system parameters and user parameters
including stored certificate will be initialized to factory state. However, password and file
system will not be changed.
⚫
Level 1 Initialization Procedure
Step Action
Product State
STS LED
1
Press function button shortly
(less than 1 second)
Button setup mode
On
2
Keep pressing the function button
over 5 seconds
Preparing initialization
Blink very
rapidly
3
Check STS LED after 5 seconds
Initialization ready
Off
4
After the step 3, release the
function button within 2 seconds
(After 2 seconds elapsed, state go
back to the step 3)
Progressing initialization
On
5
Rebooting automatically
Initial state
Off
Table 3-2 level 1 initialization procedure
WLAN easy setup function will be activated in the button setup mode in level 1
initialization. Thus, an STS LED can be blink if a wireless LAN client is linked.
