CSE-H53 User
’
s Manual Ver. 1.7
- 29 -
http://www.ezTCP.com
A situation that [Event Byte] is set to 5.
Fig 5-5 time chart for a situation that [Event Byte] is set to 5
Points
States
~
CSE-H53 has receives data from its serial port until the amount of
data is 5 bytes
①
Sends connection request segment right after receiving 5 bytes.
~
Processes of the TCP connection
②
The connection has been established
~
The “1234567” is transmitted to the remote host
Table 5-8 states of Fig 5-5
As you can see in the figure 5-5, CSE-H53 sends request segment right after the serial
data had been 5 bytes. Even though those are come before the connection is established,
the data “123”, “45” and “67” are transmitted to the remote host because of the [Event Byte]
is set to 5.