CSE-H25 User
’
s Manual Ver. 1.2
Sollae Systems Co., Ltd.
- 12 -
http://www.sollae.co.kr
Security Function (SSL, SSH)
2.1.2 Connecting to the Network
Connect power to CSE-H25, and connect CSE-H25 either directly to the Ethernet port of
the PC where test is to be performed or to the network (hub) to which the PC is
connected.
2.1.3 Configuring the Environmental Variables
When network connection is completed, configure the environmental variables such as
IP address related items, serial port related items, and communication mode related items
through the LAN using “ezManager” the environmental variable configuration program.
2.2
Test Run
You can perform test run according to the following orders. The test run described here
is based on the assumption that the IP address of the PC is set to 10.1.0.2.
2.2.1 Changing IP Address of PC
You can change the IP address of your PC as follows:
Table 2-2 IP address of PC
IP Address
10.1.0.2
Subnet Mask
255.0.0.0
Gateway IP Address
-
2.2.2 Installing CSE-H25
Connect the supplied RS232 cable between your PC and CSE-H25, the LAN cable to the
hub to which the PC is connected or directly to the PC, and the supplied CSE-H25 power
adapter to CSE-H25 for power supply. If the LAN cable has been correctly connected
when power is supplied, LINK LED turns on.
2.2.3 Configuring CSE-H25
Configure CSE-H25 setting using ezManager, the ezTCP configuration program, as
follows.
Run ezManager, and click [Search All] button in the ezManager window. And,
ezManager program will search all CSE-H25s on the local network.
When ezTCP is searched, MAC address of the ezTCP is displayed on the [Search Result]
window (The MAC address is indicated at the bottom of the product case).
