manualshive.com logo in svg

Sollae Systems CSE-H21, User Manual

The Sollae Systems CSE-H21 is a cutting-edge product designed for seamless connectivity. With its robust features, it provides users with effortless networking solutions. For a complete understanding of its capabilities, make sure to download the free user manual from our website—the ultimate resource for all your Sollae Systems product needs.

Share
Download
background image

CSE-H21 User’s Manual Ver. 1.2

 

 

Sollae Systems Co., Ltd. 

- 36 - 

http://www.sollae.co.kr

 

 

5.3.3  Disconnection   

CSE-H21  disconnects  the  TCP  connection  if  there  is  no  data  transmission  during  the 

[Timeout]. The unit of the [Timeout] is a second. 

 

5.3.4  DNS 

If numeric IP address is set to the [Peer Address],  CSE-H21 tries to connect to the specified IP 

address.  If  the  alphabetic  hostname  is  set  to  the  [Peer  Address],  CSE-H21  queries  to  the  DNS 
server. After CSE-H21 gets the IP address from the DNS server, it tries to connect the IP address. 

When CSE-H21 is in DHCP or PPPoE mode and the [Obtain DNS server address automatically] is 

set, CSE-H21 use the DNS server that it gets DNS server IP address during the DHCP or PPPoE 
connection. 

 

Summary of Contents for CSE-H21



















































Reviews:

No comments

Related manuals for CSE-H21

Panasonic C7301U - Cd Rcvr W/ Custm Dsply Installation Insrtuctions preview
C7301U - Cd Rcvr W/ Custm Dsply
Brand: Panasonic Pages: 2
JED 103 Installation And Operation Manual preview
103
Brand: JED Pages: 4
Barco ImagePRO-4K Quick Start Manual preview
ImagePRO-4K
Brand: Barco Pages: 2
Nitek MC722MT?2 Installation And Operation Manual preview
MC722MT?2
Brand: Nitek Pages: 2
Whistler PRO-100W Owner'S Manual preview
PRO-100W
Brand: Whistler Pages: 2
SAJ 8000m-2SR4GH User Manual preview
8000m-2SR4GH
Brand: SAJ Pages: 59
WAGO I/O SYSTEM FIELD 765-2704/200-000 Product Manual preview
I/O SYSTEM FIELD 765-2704/200-000
Brand: WAGO Pages: 42
Faulhaber AEMT-12 L Technical Manual preview
AEMT-12 L
Brand: Faulhaber Pages: 29
DAB MCE-150/P Instructions Manual preview
MCE-150/P
Brand: DAB Pages: 1024
CYP CM-397M Operation Manual preview
CM-397M
Brand: CYP Pages: 16
MOOD PROFUSION iS Manual preview
PROFUSION iS
Brand: MOOD Pages: 5
Digitus DA-70465 Manual preview
DA-70465
Brand: Digitus Pages: 4
Goobay 11918 Quick Start Manual preview
11918
Brand: Goobay Pages: 4
Hoymiles HMS-1600D Quick Installation Manual preview
HMS-1600D
Brand: Hoymiles Pages: 2
Microchip Technology KEELOQ HCS300 Manual preview
KEELOQ HCS300
Brand: Microchip Technology Pages: 24
Triotech XBMC Clearstream Quick Start Manual preview
XBMC Clearstream
Brand: Triotech Pages: 16
MG STE02W User Manual preview
STE02W
Brand: MG Pages: 38
ABK PA7212 User Manual preview
PA7212
Brand: ABK Pages: 17

Brands by name

Popular brands

Load more brands