CSC-H64 User Manual Ver. 1.0
- 73 -
http://www.ezTCP.com
8.2.2
Separator -
②
Using this function, you can control the length of network packets by specific characters.
separator
options
Length
select the length between 0 ~ 4 bytes
Operation
Transmit Separators without additional bytes
Transmit Sepa 1 byte
Transmit Sepa 2 bytes
Table 8-1 separator
Refer to the [Separator Function] document on our website for details.
8.2.3
TELNET COM port Control Option (RFC 2217) -
③
This option is for sending and receiving serial port states between two devices. You can
send and receive control signals such as RTS/CTS when the states are changed.
Refer to the [TELNET COM Port Control Option] document on our website for
details.
8.2.4
Disable TCP Transmission Delay -
④
If you use this option, CSC-H64 sends the data from the serial port to WLAN as quickly
as possible.
8.2.5
SSL -
⑤
It transmits and receives data with a SSL secure protocol. Refer to 7.1 SSL for details.
CSC-H64’s Data Frame interval is configured to 2byte data interval. Before sending
data from the serial port to LAN, CSC-H64 gathers data in the buffer. If there is no
data during the time configured in the 2byte data interval, it will send data
gathered until then to the network.
