SOL8930 Automatic Coffee Machine
Instruction Manual
Page 17 of 20
appliance will continue the self-cleaning process. There is a waiting period for this process, please
be patient and let the machine complete the process without stopping it manually.
9.
When the self-cleaning process is completed,
the appliance will switch off automatically.
EMPTY SYSTEM FUNCTION
The empty system function is recommended to be used before a long period of non-using the
machine, for frost protection purposes and before taking the machine to a repair agent.
1.
In standby condition, press and hold the
and Mild Coffee button
together for 5
seconds.
2.
will then be flashing.
3.
Remove the water tank from the appliance.
will light up stably, indicating that the empty
system is under process. You can press
before removing the water tank to resume back to
the standby condition.
4.
When the empty system function is complete, the appliance will switch off automatically.
Important: After performing the EMPTY SYSYEM FUNCTION; press the hot water button until water can come
out from the spout when the coffee maker is used again.
MANUAL RINSING
You can perform a manual rinsing cycle to clean the coffee nozzle after use. It is also suggested to
perform a manual rinsing if the appliance has not been used for a long period of time.
1.
In standby condition, press and hold the and hot water button
together.
2.
The hot water button will flash. The coffee nozzle will then dispense a small amount of water
which is used for the rinsing.
Danger: The water which will come out of the coffee nozzle is hot and will collected in the drip
tray underneath. Avoid contact with splashes of water.
3.
After rinsing, the appliance will return to the standby condition.
CLEANING THE APPLIANCE
1.
Disconnect the power cord from the mains supply outlet.
2.
Pour away all the water in the internal and external drip tray.
3.
Use a damp cloth or a non-scratching cleaner to clean the water stains on the appliance.
IMPORTANT
: Never use any abrasive, vinegar or descaling agents not included in the box to clean the
appliance.
Cleaning the coffee powder outlet
Coffee powder may stick to the wall of the powder outlet of the appliance after being used for a long
period of time. It is suggested to clean the outlet by following the steps below to ensure that coffee
powder can reach the brewer.
