Fill water tank,
place receptacle under
outlet
Throw in cleaning
tablet
Press Clean for 5 sec.
1
2
3
1
2
3
Loosen the knurling
screw, remove nozzle
Clean with damp
cloth
Disassemble nozzle. Place
nozzle parts under running
water and remove milk residue.
Dry separate parts, reassemble,
and mount on machine.
Every 3-4 months or
if lamp
When button «Clean» goes out:
Cleaning is finished
1
2
-
To descale, make sure that the mains cable is plugged in and the
machine switched on. During this process the heating is deactivated.
-
Use a non-poisonous, harmless, commercial decalcifying agent.
-
NEVER use VINEGAR
(possible damage to device!)
-
Note manufacturer’s instructions!
-
If the machine is turned off during the descaling procedure, it will
continue again where it left off when the machine is turned on again.
1
2
(automatic)
DESCALE
1. Place large receptacle under Cappuccino nozzle
2. Solipol rated 1:1 (0,5 l Solipol / 0,5 l Wasser)
in the water tank.
Preparation
Descale
Press buttons: Buttons «Clean»,
«Powder» and LED «Descale»
light
Open turning knob:
LED «Descale» flashes /
«Clean», «Powder» light
As soon as buttons / LED flash:
close turning knob
1
2
3
3
Rinse
1. Rinse water tank and fill
2. Open turning knob and draw off tank contents
3. Close turning knob, descaling is complete
9
8
7
6
-
Nominal voltage
see type plate on the machine
- Nominal output
see type plate on the machine
-
Power
see type plate on the machine
- Frame
metal-plastic
-
Dimensions (L x W x D)
approx. 27,5 x 35 x 42 cm /approx. 11 x 14,4 x 16,9 Inch
-
Weight
net approx. 11 kg / net 24.25 lb
- Length of mains cable
1.2 m
- Place for extra cable
yes
-
Control panel
on the front
-
Water tank
removable
-
Capacity
wate tank approx. 2 l
bean container approx. 250 g
-
Heating unit
aluminum
-
Pump pressure
15 bar
-
Safety devices
pressure-sensitive safety release valve
for heating and safety thermostat
-
Steam outlet
continuously adjustable
- Switch on main switch
- Check plug and power connection
- Fill up a measure of powder coffee
No power to the machine
No indication
Only water instead of coffee comes
when «Powder coffee» is selected
TROUBLESHOOTING
- Pre-heat cups
- Possibly clean brewing unit, descale if
necessary
- Clean nozzle with needle
(when the machine is switched
off and tap is closed)
Hot water / steam nozzle blocked
Coffee is not hot enough
No hot water / steam
- Descale machine
Heating time too long,
not enough water
Brewing unit cannot
be removed
1. Close service door
2. Switch on machine
3. Brewing unit is unlocked
4. Where appropriate, continue maintenance
of brewing unit,
see page 9
Brewing unit cannot
be inserted
Restore brewing unit to
original position
1
2
Preparation does not start
Display:
= Dregs drawer missing
= Dregs drawer full
(after 14 coffees)
= Request for cleaning
after 250 coffees
= Temperature too high
= Request for descaling
= Brewing unit blocked
= Brewing unit missing
= Door open
Wipe with a soft, damp cloth
Rinse under running water
Casing
Container for coffee grounds and
drip tray
CLEANING
Rinse under running water
Remove the filter that is in the water tank and
rinse thoroughly. Replace by turning and pressing
lightly into place.
Clean weekly
Water tank
Coffee outlet
Use a mild non abrasive cleaning agent!
- The machine must not be connected to main switch for cleaning.
- Do not use conventional and / or microwave ovens for drying the coffee machine components.
2. Press button «Coffee powder»
(do not fill in coffee powder)
Brewing unit
Clean weekly.
Never clean the brewing unit
in the dishwasher!
1. Open service door.
Remove drip tray / grounds container
2.1 Loosen sieve with key...
2.2 ...and remove
2. Press PUSH-position and remove
brewing unit. If necessary, unscrew the
uppermost sieve in the brewing unit
Clean everything under running warm water
and let it dry. Clean service area
3. Reassemble brewing unit and
slide in,
do NOT press the PUSH-
position!
4. Insert drip tray and grounds container,
then close service door
1. Place receptacle under coffee outlet
3. Let flow pure water through the system
to avoid residuals in the pipes etc.
The documentation for your new coffee machine consists of these instructions and the
separately enclosed safety advice. This documentation should be read before the installation
of the device. Keep the documentation handy at any time and pass it on to any other
user.
Duration: approx. 45 min.
= Ventilate machine
= Fresh water tank empty
= The motor of the grinding unit
is blocked
= No beans
Operating Instruction
Duration: approx. 6 min.
See page 1, ventilate
See page 6, descale
Note: coffee can still be prepared
Contact the Service technician
Refill with beans
Fill water tank with fresh water
Insert dregs drawer
Empty dregs drawer (with machine switched on)
See page 6, clean
Note: coffee can still be prepared
See page 1, Ventilate
See page 8, Troubleshooting (Brewing unit)
Insert brewing unit
Close door
Tagliare
Machine
CLEAN
Cappuccino nozzle
Supplied accessories
Key for strainer
dismantling / assembly
Cleaning brush
Technical data
Coffee measure
Test strip for water hardness
Cleaning agent
Cleaning tablets
Descaling agent
(optional)
TSM SUCCESS MANUAL® Safe to use - easy to understand due to
TSM® - Total Security Management and ergonomic communication®
This TSM SUCCESS MANUAL® has been examined by SEV for conformity with the safety-relevant standards, and has
been analysed by an application-oriented risk analysis for the completeness and correctness of the indications for a safe
use of the a ppliance. Thereby we assume a use with which can be reckoned based on common-sense.
R A P I D S T E A M
