GB
GB
s
TROUBLESHOOTING
Problem
Possible cause
Solution
Little
humidification
power.
– The function
SL
or
LO
resp.
40 %
has been set.
– The water in the water
tub is very cold.
– Select a higher humidification
power, e. g.
60 %
or
70 %
or a
higher ventilation speed
MI
or
HI
.
– Select the humidification power
60 %
or
70 %
. After 10 minutes,
humidification power will have
increased.
No
humidification
power.
– The power plug is not
connected to the socket.
– First, the warning light
NO!
and
■
■
■
■■
lit up,
then the appliance and
all displays switched off.
– Firmly connect the power plug
to the socket.
– Switch the appliance off.
Fill the water tank up with
fresh tap water, then switch
the appliance on again.
An indepen-
dent humidity
switch measu-
res a different
humidity value
from the dis-
play on the
appliance.
– Dirt has collected in
the air outlet or inlet
opening.
– The appliance is placed
near a window or an
open door.
– Clean the air inlet and outlet
openings.
NOTE:
Even within one
room, different values for humi-
dity can be measured. The value
on the appliance refers always to
the humidity exactly by the appli-
ance.
– Place the appliance in a spot free
of draft.
The escaping
air smells
unpleasantly.
– There is old water in the
water tub / water tank.
– Drain the water and clean the
appliance as described in
”
Cleaning and maintenance
“
.
Fill the water tank with fresh tap
water.
97
96
s
STORAGE
●
Check if the appliance is switched off and the power plug is pulled resp. the
power cord is removed. The water has to be drained completely.
●
Check if the appliance inside is completely clean and dry. If necessary, let the
appliance stand open until the humidification disks and the water tub are dry
on the inside.
●
Keep the appliance standing upright in a dry, dark spot, best in the original
packaging. Do not place anything on the appliance.
●
Always keep the appliance and power cord out of the reach of children.
