27
11. Open the hopper gate at the back of the
bean container
1
.
12. Place a container under the
portafilter holder
3
.
13. Switch on the appliance.
14. Press and hold the
grind time knob
c
to switch on the grinder.
15. When all GRINDZ
TM
has run through the appliance, release the
grind time knob
c
to switch off the grinder.
16. Close the hopper gate.
17. Switch off the appliance and remove the
bean container
1
(see image E).
18. Empty the
bean container
1
.
19. Rinse the
bean container
1
with warm water and a mild detergent.
20. Rinse the
bean container
1
with clean water.
21. Dry the
bean container
1
thoroughly.
22. Reassemble the grinder and the
bean container
1
. Make sure all parts lock in
place.
23. Fill the
bean container
1
with coffee beans.
24. Open the hopper gate at the back of the
bean container
1
.
25. Switch on the appliance.
26. Press and hold the
grind time knob
c
to switch on the grinder.
27. After 20 seconds, release the
grind time knob
c
to switch off the grinder.
28. Set the
grind size selector
g
back to the desired position.
29. Switch off and unplug the appliance.
4
Make sure the portafilter is not hot when removing the spout.
30. Unscrew the spout of the
portafilter
s
.
31. Soak the following parts in warm water and a mild detergent:
•
Portafilter
s
(only the metal parts)´
•
Cup filters
p
a
•
Spout
32. Unscrew the steaming nozzle from the
steaming wand
5
.
4
If the nozzle opening is blocked, you can use the pin on the cleaning tablet holder
to remove the blockage. If you cannot unblock the nozzle with the pin, rinse the
nozzle with warm water and try again.
33. Rinse the nozzle in warm water.
34. Gently screw the nozzle back onto the
steaming wand
5
.
35. Clean the appliance and the
water tank
8
with a soft and damp cloth.
36. Dry the appliance and the
water tank
8
.
37. Plug in and switch on the appliance.
