EN LED Floodlight
Type: WM-100W-FVS – power: 100W
Dear customer,
Thank you for purchasing this outdoor LED lamp.
Read and follow these instructions carefully to assure that your product is used safely
and to your complete satisfaction!
Usage:
•
the lamp is designed for lighting open spaces, especially industrial areas and
around homes
•
easy to install
•
gives out a clear, intense light
Installation:
WARNING!
•
Before starting installation, during maintenance or disassembly, the power must
always be disconnected by turning off the switch or circuit breaker.
•
The lamp heats up when it is on. Before performing any work with the lamp, e.g.
maintenance, the lamp must always be disconnected from the power supply and
left for a few minutes to cool down completely.
•
The lamp must not be used without the protective glass or if the protective glass is
cracked.
•
Before fixing the lamp in place, check that the lamp is sufficiently far away from
nearby objects; the lit object must be at least 0.5m away from the protective glass
Troubleshooting:
If the lamp does not light up, first check the power supply.
Caution:
Keep out of reach of children; do not tamper with wiring. Technical changes are
reserved; keep this manual in a safe place.
SOLIGHT Holding, s.r.o. is in no way liable for damaged caused by improper
installation of the lamp, improper electrical wiring, the use of other than the
recommended accessories, unapproved technical changes, or failure to comply with the
recommendations in this manual!
Type: WM-100W-FVS
Power:
100W; Voltage: 100-265V,
50/60Hz
Light source: LED SMD 100W LG;
Luminous flux: 8500Wlm
Chromaticity: 6000K; Material: Die-cast
aluminium
IP44
