EN
Solight TE09 Thermometer with cord
Operating Instructions
Dear customer, thank you for purchasing our product. In order that we may serve you safely and to
your complete satisfaction, please read and follow these instructions carefully. That way you can avoid inappropriate use or
damage. Prevent the unauthorised use of this device and always respect all conventions applicable to the handling of electric
appliances. Please carefully store these Instructions for Use. This device is intended exclusively for use in the household or inside
a room. This product should only be used by adults. This product must never be exposed to high humidity (for example, in a
bathroom) nor come into contact with fluids. Limit its proximity to or contact with household or computer equipment in order to
prevent interference.
Features:
5 buttons: SET, UP, DOWN,
℃
/
℉
and SNZ
Time display with 12/24 hour format
Alarm and snooze function
Indoor and outdoor temperatures
MAX/MIN history records of temperatures
℃
/
℉
switchover
Temperature scope:
indoor - 10
℃
+50
℃
(+14
℉
-- +122
℉
)
outdoor - 50
℃
+70
℃
(-58
℉
-- +158
℉
)
LR54, LR1130 battery (included)
Operation instruction:
1. Time setting
Press SET for 3 seconds to select 12/24 hour format, 24 hour format as default, press UP to select 12 hour format, press UP again
to change to 24 hour format (recycle continuously)
Press SET, hour digits are blinking, press UP or DOWN to set the hour.
Press SET, minute are blinking, press UP or DOWN to set the minute and press SET again to confirm and exit.
2. Alarm and Snooze setting
Alarm setting
Press SET to check the alarm time.
Press SET for 3 seconds, the alarm hour digits are blinking and press UP or DOWN to set the alarm hour.
Press SET again, the minute digits are blinking and press UP or DOWN to set the alarm minute.
Press SET to check the set alarm time.
Press SET to come back to the current time display.
Alarm on/off setting
After alarm is set, press SNZ to set the alarm.
Press SNZ for 3 seconds to turn on/off alarm.
Snooze setting
When alarms, press SNZ to stop the alarm and turn on the snooze at the same time with an interval of 8 minutes; press any other
key to turn off the alarm and no alarm in the same day.
3. Temperature
Press UP then MAX history records of indoor and outdoor temperat
ures displayed: with “MAX” displayed on LCD, press SET to
clear and display changes from MAX to ---.- and come back to current temperature display after 15 seconds or press UP twice to
come back to the current temperatures.
Press UP twice then MIN history
records of indoor and outdoor temperatures displayed: with “MIN” displayed on LCD, press SET to
clear and display changes from MIN to ---.- and come back to current temperatures after 15 seconds or press UP to be back to
current temperatures.
Under normal time display mode, press
“
℃
/
℉”
to switch
℃
/
℉
unit.
Note: when temperature is higher than maximum testing scope, HH.H displayed; when temperature is lower than the minimum
testing scope, LL.L displayed.
The product is CE (Declaration of Conformity) certified, in accordance with current regulations. On request, at the producer: [email protected], or for download at
shop.solight.cz. Producer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic.