Transmitter and receiver grouping options
Figure 1: A maximum of 15 transmitters (buttons) can be paired to one receiver (bell).
Figure 2: One transmitter (button) can be paired with up to 8 receivers (bells).
Troubleshooting possible problems
If the receiver does not ring repeatedly after pressing a button on the transmitter, check:
-
the distance between the transmitter and the receiver is not too great.
-
There are no strong sources of signal interference between the transmitter and receiver (radio and wireless networks, large
metal objects, reinforced concrete walls, etc.).
In case of problems, contact your dealer. The product is covered by a CE Declaration of Conformity in accordance with applicable
regulations. On the website or on request from the manufacturer: [email protected]
Manufacturer
: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, www.solight.cz
Solight Holding s.r.o. declares that the product complies with the requirements and provisions of Directive 2014/53/EU. The
equipment can be freely operated in the EU. The declaration of conformity is available at www.solight.cz.
The product can be operated under general authorisation No.VO-R/10/05.2014-3
Přijímač
Vysílač 1
Vysílač 2
Vysílač 4
Vysílač 3
Vysílač
Přijímač 1
Přijímač 3
Přijímač 2
Přijímač 4
