Transmi
Transmi
Transmi
Transmi
Receiver
If you have multiple transmitters paired to your receiver, you may need to unpair one of the transmitters. To unpair, follow these steps:
-
Press and hold the button to change the bell volume, after three seconds you will hear the melody "Dong Dong", keep holding the
button until you hear the ringing again.
Figure 1:
Figure 2:
Solving possible problems
If the receiver does not ring repeatedly after pressing the button on the transmitter, check:
-
battery capacity in the transmitter and receiver. The battery may have been discharged prematurely.
-
whether the distance between the transmitter and the receiver is too large.
-
there are no strong sources of signal interference between the transmitter and receiver (radio and wireless networks, large metal
objects, reinforced concrete walls, etc.).
If you have any problems, please contact your dealer.
Solight Holding s.r.o. declares that the product complies with the requirements and provisions of Directive 2014/53/EU. The equipment can
be operated freely in the EU. The product can be operated under general authorisation No. VO-R/10/05.2014-3. The Declaration of
Conformity can be found at www.solight.cz.
Producer: Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, www.solight.cz
Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic.
Transmitt
Receiver 1
Receiver 2
Receiver 3
Receiver 4
