20
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
•
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
•
The hobs are clas
sified as “Y” class for heat protection. Ideally the hob should be
installed with plenty of space on either side. There may be a wall at the rear and tall units
or a wall at one side.
On the other side, however, no unit or divider must stand
higher than the hob.
•
The piece of furniture or the support in which the hob is to be fitted, as well as the edges
of furniture, the laminate coatings and the glue used to fix them, must be able to resist
temperatures of up to 100 °C.
•
The mural rods of edge must be heat-resisting.
Cut size
Flush mounting
Glass size
Type
Width
Depth
Width
Deph Radius
Width
Depth
Thickness
112552909
278
490
296
516
8
290
510
4
Stick the gasket (2) two millimeters from
the external edge of the glass, after
removing the protection sheet (3).