25
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of specialists.
The installer is held to respect the legislation and the standards enforce in his home country.
How to stick the gasket:
The gasket supplied with the hob avoids all infiltration of liquids in the cabinet.
The gasket supplied with the appliance also allows to maintain in position the appliance, it is not
necessary to use another fixation system.
His installation has to be done carefully, in conformity of the following drawing.
Fitting - installing:
•
The cut out sizes are:
Type
Cut size
Flush mounting
Glass size
Width
Depth
Width
Depth
Radius
Width
Depth
Thickness
112552907
270
480
296
516
8
290
510
4
•
Ensure that there is a distance of 50 mm between the hob and the wall or sides.
•
The hobs are classified as “Y” class for heat protection. Ideally the hob should be installed
with plenty of space on either side. There may be a wall at the rear and tall units or a wall at
one side.
On the other side, however, no unit or divider must stand higher than the
hob.
Stick the gasket (2) two millimeters
from the external edge of the glass,
after removing the protection sheet (3).
