8
+44(0)20 - 78 94 15 16
www.topregal.com
CONTROL SYSTEM
Start the truck, bring the tiller to an inclined position („F“). Operate the direction lever on the tiller (12): Forward „V“ or
Reverse „R“. By carefully moving the direction lever, you control the speed until the desired speed is reached.
Position the directional lever in the centre to slow the truck down to a complete stop/parking position. If the truck is
stopped permanently, apply the parking brake.
Always drive carefully and keep your eyes on the road - adjust the speed if necessary.
APPLY THE BRAKES
The load braking performance depends on the ground conditions and the load of the truck.
Activate the brake function as follows: The truck brake is activated by moving the direction lever (12) back to position
„0“ or by releasing this lever. Or by moving the direction lever in the opposite direction until it begins to move in the other
direction.
When the tiller is moved up or down into the braking zone (B), the vehicle braking is activated. When the emergency stop
switch is pressed, the handle is automatically moved to the braking zone and the parking brake is activated. The large red
safety button on the head of the tiller means that this function can also be triggered with the upper body. The truck slows
down and comes to a standstill until reverse (R).
TROUBLESHOOTING
If there is a fault and/or the truck does not work, please stop using the truck and press the emergency stop button (2). Park
in a safe area, turn the key switch (16) counterclockwise and remove the key.
Immediately inform your responsible employee and/or contact customer service.
IN CASE OF EMERGENCY
In case of an emergency, press the emergency stop switch (2). All electrical functions are stopped. Maintain a safety
distance.
GENERAL
V
R
V
R
R
V
R
