Solid Bikes Europe Rudolf-Diesel-Straße 13 D-72250 Freudenstadt
Solid Bikes Europe
T +49 (0) 7441 / 952-450
Inhaber Peter Schmid
F +49 (0) 7441 / 952-451
Rudolf-Diesel-Straße 13
D – 72250 Freudenstadt
www.solidbikes.de
Sie erreichen uns Montag bis Freitag von 8:00 Uhr bis 13:00 Uhr und von 14:00 Uhr bis 17:15 Uhr
Disassembly of the rear wheel
For the disassembly/removal of the rear wheel, please proceed in the sequence as follows:
-
Remove M6 counter screw on drive side (4-mm hex key) (1)
-
Loosen radial clamping screw(pinch bolt) on non drive side (4-mm hex key) (2)
-
Loosen axle from non-drive-side via 6-mm hex key and take out (3)
1
3 2
Assembly is performed the other way around.
Please be aware that you should not pull the brake levers while the wheels are not assembled. The
pistons in the caliper may close and be difficult to prise apart.
Maintenance
Due to the high loads a downhill bike experiences, it is important to get your bike checked-up by
qualified personnel on a regular basis.
After the first few runs, we recommend to check the spoke tension, the correct adjustment of your
head set and all bolts.
For the service intervals for your suspension components, we recommend to consult the individual
manufacturer’s webpage.
HAVE FUN RIPPING!
Yours,
Solid Bikes Team
