1.
Introduction
The XLogic Channel ADC card is a small PCB assembly containing a high quality 24-bit stereo ADC.
The card is intended to be fitted inside the XLogic Channel unit to provide immediate A to D
conversion at any of the common sample rates between 44.1kHz and 192kHz. The ADC can be
synchronised either to internal crystal or an external word clock or AES/SPDIF sync source. Digital
output from the card is provided in both balanced AES and un-balanced SPDIF formats.
Because the XLogic Channel unit is a mono unit, a second balanced line-level input to the ADC card is
provided. This allows connection of, for example, a second XLogic Channel unit to enable full use of
the AES/SPDIF stereo data stream.
The object of this manual is to provide purchasers of the XLogic Channel ADC card with information
in the following areas:
• Safety considerations
• Installation instructions
• Operational instructions
• Connector pin-outs
• Specifications and physical dimensions
Please Note
The XLogic Channel ADC card is a hardware upgrade for the XLogic Channel unit – it must be
installed before it can be used. Full instructions to achieve this are provided within this
document, however, if you are unsure about performing this please contact your local Solid State
Logic distributor who will be happy to arrange to install it for you. Do note that a charge may be
levied for this service.
Warranty
The warranty period for this card is 12 months from date of purchase.
In Warranty Repairs
In the event of a fault during the warranty period the unit must be returned to your local distributor
who will arrange for it to be shipped to Solid State Logic for repair. All units should be shipped to Solid
State Logic in their original packaging. Solid State Logic can not be held responsible for any damage
caused by shipping units in other packaging. In such cases Solid State Logic will return the unit in a
suitable box, which you will be charged for. Please do not send manuals, power leads or any other
cables - Solid State Logic can not guarantee to return them to you. Please also note that warranty
returns will only be accepted as such if accompanied by a copy of the receipt or other proof of purchase.
Out of Warranty Repairs
In the event of a fault after the warranty period has expired, return the unit in its original packaging to
your local Solid State Logic distributor for shipment to Solid State Logic. You will be charged for the
time spent on the repair (at Solid State Logic's current repair rate) plus the cost of parts and shipping.
Introduction
Page 3
