background image

To run  the SSL Console Bundle Plug-Ins you  need a  host PC equipped 
with  an 

SSL  MX4  PCIe  Card

  or 

SSL  Mixpander/5

  (or  Soundscape 

Mixpander/9)  and  the  latest  Version  of  the  SSL  Mixer  V6.x  or  SSL 
Soundscape V6.x Software.

In  order  to get the most  out  of  the SSL Console Bundle plug-ins,  your 
system needs the following minimum specification:
• Working SSL Mixer V6 or SSL Soundscape V6 Installation
• Windows XP or Vista 32-bit (NT, 95/98, ME, 2K are NOT supported)
• 32-Bit Graphics Mode and Card with DirectX8 or higher
• Pentium, Core2, i7 or equivalent based System with at least 2.2GHz   
  (or equivalent overall CPU power in Multicore Systems)
• 512MB or more of Ram (2GB min recommended)

DSP Resources:

Double Precision 48-Bit DSP Memory:
Since  the  whole  processing  chain  inside  the  EQ-Filters  and  major 
processing blocks of the Console Dynamics and Bus Compressor plug-
ins  are    fully 48-bit  double precision,  only 48-bit  DSP  memory can  be 
used  to  run  each  instance  of  the  plug-in  without  additional  latency 
inside the SSL V6 DSP architecture.
Only  a  limited  amount  of  the  memory  inside  the  mixpander  5/9  DSP 
platforms is available for direct 48-bit operations.
The  MX4  PCIe  Cards  however  provides  a  huge  amount  of  48-bit 
memory needed to run multiple instances of the plug-ins.

Especially with Mixpander  based Systems you therefore may encounter 
situations where you are not able to load more SSL Console Bundle 
plug-ins  because there is  no more 48-bit  memory  available  (indicated 
by the [M] parameter in the Mixers caption bar). 

However, you may  well have enough  DSP resources to be able to load 
other standard or optional plug-ins which utilise 24-bit memory only.

The  tables  below  show  the  max.  number  of  simultaneous  mono  and 
stereo instances of  one  Plug-In  at 

44.1 kHz

,  inserted on  an  individual 

Mono to Mono or Stereo to Stereo Channel Strip with Output Fader.

Note: For  higher  sample rates (48kHz, 88.2kHz and 96kHz)  more Processing-Cycles 
are required for calculation, meaning less instances will be available.

MX4 PCIe

 

Plug-In

Mono

Stereo

SSL Console EQ-F

92

48

SSL Console Dyn

88

48

SSL Bus Comp

-

164

Mixpander 9

 

Plug-In

Mono

Stereo

SSL Console EQ-F

40

32

SSL Console Dyn

56

32

SSL Bus Comp

-

100

Mixpander 5

Plug-In

Mono

Stereo

SSL Console EQ-F

20

16

SSL Console Dyn

28

16

SSL Bus Comp

-

50

2. System Requirements

                  

SSL Console Bundle for MX4

                                                                             Page 4

Summary of Contents for SSL Console Bundle




















Reviews: