manualshive.com logo in svg

Solid State Logic SSL 2, User Manual

Share
Download
Solid State Logic SSL 2 User Manual Download Page 6

Get-Started

4

 SSL 2 User Guide

Get-Started

Unpacking

The unit has been carefully packed and inside the box you will find the following items:

•  SSL 2
•  Quickstart/Safety Guide
•  1m 'C' to 'C' USB Cable
•  1m 'A' to 'C' USB Cable

USB Cables & Power

Please use one of the provided USB cables ('C' to 'C' or 'C' to 'A') to connect the SSL 2 to your computer. 
The connector on the rear of SSL 2 is a 'C' type. The type of USB port you have available on your computer 
will determine which of the two included cables you should use. Newer computers may have 'C' ports, 
whereas older computers may have 'A'. As this is a USB 2.0 compliant device, it will make no difference to 
the performance as to which cable you use. 

SSL 2 is powered entirely from the computer's USB-bus power and therefore requires no external power 
supply. When the unit is receiving power correctly, the green USB LED will light a steady green colour. For 
best stability and performance, we recommend using one of the included USB cables. Long USB cables 
(especially 3m and above) should be avoided as they tend to suffer from inconsistent performance and 
are unable to provide steady and reliable power to the unit.

USB Hubs

Wherever possible, it is best to connect SSL 2 directly to a spare USB port on your computer. This will give 
you the stability of an uninterrupted supply of USB power. However, if you do need to connect via a USB 
2.0 compliant hub, then it is recommended that you choose one of high enough quality to provide reliable 
performance - not all USB hubs were created equally.  With SSL 2, we've really pushed the limits of audio 
performance on a USB bus-powered interface and as such, some low-cost self-powered hubs might not 
always be up to the task. Usefully, you can check out our FAQs at 

solidstatelogic.com/support

 to see 

which hubs we've succesfully used and found to be reliable with SSL 2.

Safety Notices

Please read the 

Important Safety Notices

 at the end of this User Guide before use.

System Requirements

Mac and Windows operating systems and hardware are constantly changing. Please search for 

'SSL 2 Compatibility'

 in our online 

FAQs to see if your system is currently supported.

USB Power LED

Summary of Contents for SSL 2




























Reviews:

No comments

Brands by name

Popular brands

Load more brands