Network I/O Stagebox SB 32.24 User Guide
Inputs/Outputs
Select the Inputs or Outputs tab in the Page Select area to view I/O available on the network.
View Inputs
●
Channel Info
shows all parameters of the channel at a glance. The
ATT
flag will change to
red on channels requesting attention.
●
Fader
allows for manual level control via the slider, keyboard arrow keys, or numeric entry
by clicking the text Gain Value box.
●
The
fader level bar
is coloured red on microphone input channels and cyan on line level
inputs.
●
Mute
mutes the input or output channel.
●
+48V
toggles the mic preamp phantom power. Selecting Line input will turn off phantom
power.
●
Pad
toggles the -30 dB mic preamp pad.
●
Mic/Line
select toggles the appropriate input gain range and impedance for mic or line level
sources.
●
ATT
(Attention) toggles the hardware front panel LED for fast identification of a physical
input connector. Multiple channels can have Attention active. All attention signals on a
stagebox can be cleared via the Setup window.
●
Level Meter
shows the signal level for the selected channel. A red clipping indicator is also
provided.
●
Control Status
shows whether the viewer has control of the input’s parameters
○
Rel
in Cyan indicates that this input is under the control of the viewer. Press and Hold
to relinquish control
○
Take
indicates that the input is NOT under the control of the viewer. Press and Hold
to take control from the owner.
●
Show Gain
toggles the fader into the focus view window. Gain can be controlled via mouse,
keyboard, or numeric entry.
Page 14 of 25
Summary of Contents for SB 32.24
Page 1: ......
