background image

Features 

• Professional quality quad microphone array for recording and video conferencing applications

• Optimised digital signal processing (DSP) modes using SSL EQ and dynamics algorithms

• Four preset DSP modes:

– Solo (directional; e.g. individual use for conference calls, podcasting)

– Group (e.g. round table, multiple directions)

– Vocal (e.g. recording singing, narration)

– Music (e.g. recording loud sources)

• Automatic smart mixer for picking up multiple room sources on group calls

•  Enhanced dual-mono, stereo and quad signals provided for video conferencing,  traditional stereo and

 

immersive recording applications respectively

• High quality 3.5 mm headphone output with mic Loopback option for ambient monitoring

• Touch-sensitive controls to adjust headphone level and mute the mic

• ‘Cough Switch’ and ‘Push To Talk’ features for temporarily muting/unmuting the mic

• Backlit RGB illuminated Solid State Logic logo indicates mic mute state and DSP mode

• ¼” camera tripod thread in base with included mic stand thread adapter for flexible mounting

 

options

• 2 m USB Type C to C cable and USB Type C (female) to Type A (male) adapter included

• USB powered

• Compatible with Windows, Mac, iOS

*

 and Android

*

Summary of Contents for CONNEX

















Reviews: