Reproduction is permitted provided copyright information is intact.
S E T T I N G U P S I M P L E .T V
Setting up SimpleTV starts with going to
You’ll want to do this
even before you set up any hardware
because there are detailed instructions
on how to set up the device. You’ll be
prompted to create an account (which is
mandatory for Premier lifetime service.)
The activation code for lifetime service
will be on the owners’ manual if you
purchased from Solid Signal. Enter it and
you should see the image above.
At this point you’ll be prompted to
connect the Simple.TV device. There are
about four screens each with a single
instruction like the one at bottom left.
Once your Simple.TV is connected to your
network with the supplied Ethernet cable,
you’ll be prompted to search for the Simple.
TV box you want to setup. Searching
generally takes about a minute.
When the
device is found, click on it and then you
will be able to go to the next step.
