background image

14                         ©2014,

 SolidSignal.com

 

Reproduction is permitted provided copyright information is intact.

The Wireless Cinema Connection Kit (CCK) can be a little harder to install. There are several choices 
you must make.  You will need the following: 

DIRECTV CCK-W Wireless DECA Cinema Connection Kit (CCK-W)

Within the box, you’ll find a short ethernet cable and a short coaxial cable.

First, use one of the following procedures to connect the CCK to your home wireless network.

OPTION 1: 

1.  If your home network is set up for Wireless Protected Setup (WPS), put your router in WPS Mode.
2.  Plug the CCK into a power outlet and wait roughly 1 minute for bootup.
3.  Press the (WPS) button on the side of the CCK.
4.  (Note:it is not necessary to connect the coaxial or ethernet cables at this time.)

OPTION 2:

1.  Bring the CCK into a room that has a DIRECTV receiver connected. 
2.  Plug the CCK into a power outlet and wait roughly 1 minute for bootup.
3.  Using the supplied cable, connect the CCK to your receiver’s “Ethernet 1” port. If there is only one 

port, use that.

4.  Use your remote for the following steps:

•  {MENU}, then Arrow down to “Settings and Help” then press {SELECT}
•  Make sure “Settings” is highlighted and press {SELECT}
•  Arrow down to “Network Setup and press {SELECT}
•  Make sure “Connect Now” is highlighted and press {SELECT}
•  Follow the onscreen prompts to set up a Wireless adapter. You will need to know your 

wireless security key.

OPTION 3:

1.  Bring the CCK into a room that has a computer, or bring the computer to the CCK.
2.  Disconnect the computer from the internet. This may involve turning off its wireless adapter.
3.  Plug the CCK into a power outlet and wait roughly 1 minute for bootup.
4.  Open a browser window and navigate to 

http://169.254.1.100:8080

5.  When prompted for a username and password, use

 admin

 for both

6.  Follow the onscreen menus to set up the CCK. You will need to know all the details of your 

wireless network.

No matter how you do it, you will know it’s right when both the “POWER” and “WLAN” lights are green.

The following diagram describes the three options for connecting a Wireless CCK.

INSTALLING A WIRELESS  

CINEMA CONNECTION KIT

Summary of Contents for DECA BROADBAND























Reviews: