GARDEN SHED
– MODERNA2 13 x 10 (1 1/8’’)
5
STARTER WALL BOARDS
POSITION
DESIGNATION
DIMENSION (inch) QUANTITY
1
Nicked lower starter front
wall-board
117.32 x 2.16 x 1.1
1
2
Lower back wall-board
117.32 x 2.16 x 1.1
1
3
Side wall-board
117.32 x 4.33 x 1.1
32 + (1*)
To form the core framework, begin with a
nicked lower starter front wall-board
(
part
no. 1), a
lower back wall-board
(
part no. 2) and
side
wall-boards
(
part no. 3
)
ensuring
the lock of corners and positioning the groove of a wall-boards to the bottom and the
tongue to the top. Check for squareness by measuring the diagonal distance. Shift the
corners until you get even distance between the opposite corners.
Anchor treated floor joists to concrete using concrete anchors (not provided), then fasten
two lower boards to the treated floor joists using wood screws. If not using floor joists
supplied, secure the lower wall boards directly to your foundation.
To anchor your shed, fasten lower wall boards using long wood crews (not provided) to
the floor joists. Screw through the tongue 2-3 inches away from the corner joint or
predrill and screw through the joint.
Predrilling is necessary if
screwing the joint as
the wood is thinner there and may split upon screw insertion.
From there on, you
won’t need screws for the rest of the wall boards
.
NOTE
!
You may have through screws and nails.
