8
SOLID AIR ® INTERNATIONAL
•
T +31 598 36 12 21
•
www.solid-air.com
•
3. STANDARDS AND REGULATIONS
3.1 Applicable standards and regulations
The following standards and regulations apply to the ventilation units:
•
Machinery Directive 2006/42/EC.
•
Low Voltage Directive 2014/35/EU.
•
EMC Directive 2014/30/EU.
•
ErP Directive 2009/125/EC.
•
RoHS Directive 2011/65/EU.
•
DIN EN ISO 12100 ............................................Safety of machinery - general principles for design
•
DIN EN ISO 13857 ............................................Safety of machinery - safety distances
•
DIN EN 349 ........................................................Safety of machinery- minimum clearances
•
DIN EN ISO 14120 ............................................Safety of machinery - guards
•
VDI 6022 .............................................................Hygiene requirements for ventilation and air conditioning systems and units
•
DIN EN 1886 ......................................................Ventilation of buildings - central air handling units
•
DIN ISO 1940-1 .................................................Mechanical vibration - balance quality requirements
•
VDMA 24167 ......................................................Fans - safety requirements
•
DIN EN 60204-1 ...............................................Safety of machinery - electrical equipment of machines
•
DIN EN 60730 ...................................................Automatic electrical controls
•
DIN EN 61000 -6-2+3 ....................................Electromagnetic compatibility
•
DIN EN 60335-1 (VDE 0700-1) ....................Safety of electrical appliances - general requirements
•
VDI 3803 .............................................................Central air conditioning systems - Structural and technical principles
3.2 For installation and maintenance, the following standards and regulations must be observed
•
DIN EN 50106 (VDE 0700-500) .................Safety of electrical appliances - tests
•
DIN VDE 0100 ................................................... Regulations regarding the installation of high voltage systems up to 1000V
•
DIN EN 50110-1 (VDE 0105-1) ......................Operation of electrical installations
•
DIN VDE 0105-100 ..........................................Operation of electrical installations - general stipulations
•
DIN VDE 0701-0702 ........................................ Inspection after repair, modification of electrical appliances, periodic inspection -
repeat testing of electrical appliances
•
VDI 2050 .............................................................Requirements for technical equipment rooms - Planning and execution
3.3 Warnings
>>
Removal and disabling of safety and monitoring equipment is prohibited.
>>
Only operate the system if it is in technically sound condition.
>>
Ensure that any faults or damage that may impact on safety are rectified immediately.
