GPS Fly
CG12
Setting the User’s information:
•
Press S5 while
USER
is blinking. MALE
will start to blink.
•
Press S1/S11 to change the gender.
•
Press S5 to confirm and set the AGE. Age digits will start to blink.
•
Press S1/S11 to change the age digits.
•
Press S5 to confirm and set the WEIGHT. Weight digits will start to blink.
•
Press S1/S11 to change the weight digits.
•
Press S5 to confirm and set the HEIGHT. Height digits will start to blink.
•
Press S1/S11 to change the height digits.
•
Press S5 to confirm and go back to USER setting screen.
•
Press S7 to exit
Setting the NIGHT mode:
•
Press S5 while NIGHT is blinking. The watch will display
10
seconds blinking.
•
Press S1/S5 to change to
20
sec or
NIGHT ON
.
•
While on 10 SEC or 20 SEC setting, Press S5 to accept the setting and go back to NIGHT
setting screen.
•
While on NIGHT ON setting screen Press S5 to accept the ON setting. The watch will
display the START TIME.
•
Press S1/S11 to toggle between
START TIME
and
END TIME
.
•
Press S5 or 3 seconds auto to set the START TIME. Hour digit will start to blink.
•
Press S1/S11 to change the hour setting.
•
Press S5 to change the MINUTE. Minute digits will start to blink.
•
Press S1/S11 to change the minute setting.
•
Press S5 to go back to START TIME setting screen.
•
Press S1/S11 to set the END TIME. Hour digit will start to blink.
•
Follow the procedure in setting the START TIME.
•
Press S7 to exit to NIGHT ON setting screen.
•
Press S7 to exit to NIGHT setting screen.
Setting the DISPLAY (LCD contrast):
•
Press S5 while
CONTRAST
is blinking. Contrast percentage will start to blink.
•
Press S1/S11 to change to your desired value. LCD Contrast range is from 10 to 100%.
•
Press S5/S7 to exit to CONTRAST setting screen
Setting the Chime:
•
Press S5while CHIME is blinking. The watch will display CHIME ON.
•
Press S1/S5 to change to CHIME OFF or OFF.
•
Press S5/S7 to confirm and exit to CHIME setting screen
Note: When Chime is ON, there is an hourly Chime and the Key tone will automatically ON.
There is also a confirmation sound every time you press a button. The Chime icon also
appears in all modes. If Chime is OFF the Key tone will automatically OFF.
Setting ALARM:
•
Press S5 while ALARM is blinking. AL-1 will start to blink.
•
Press S1/S1 to toggle through Alarm 1 to alarm 5. The watch has 5 alarms which can be
set individually
•
Press S5 to set the selected Alarm number. The HOUR digit will start to blink.
•
Press S1/S11 to change the hour digit.
•
Press S5 to confirm and set the MINUTE digit. The minute digit starts to blink.
•
Press S1/S11 to change the minute digit.
•
Press S5 to confirm and set the T1 or T2 setting. T1 or T2 starts to blink. The alarm time
will be referred to Time 1 or Time 2.
•
Press S1/S11 to change setting
•
Press S5 to confirm. Alarm ON or OFF will start to blink.
•
Press S1/S11 to change the setting.
•
Press S5 to confirm and go back to ALARM 1 setting screen
•
Press S7 to exit
Battery:
Watch is using a rechargeable Lithium Ion battery that will require approximately 4.0 hours
charging time using the USB cable. While battery is charging, the watch cannot be used and all
buttons are disabled. User needs to recharge the battery when the watch indicates a “low
battery”.
Note:
Battery Life
(fully charge battery);
8 hrs typical
continues run with GPS ON and CHRONO ON.
Summary of Contents for GPS Fly
Page 10: ...GPS Fly CG12 ...
