.
OPERATION INSTRUCTIONS
1. ON/OFF
-
Press the
button to turn the A/C on or off. When the unit is turned off, the Timer func-
tion will be cancelled. The set temperature will be saved.
2. MODE SELECTION
-
Press the MODE button repeatedly to cycle between the different modes: Au-
to, Cool/Energy Saver, Dry (Dehumidifier), and Fan.
3. TEMPERATURE SETTING
-
Press the
▼
button to decrease the temperature when the unit is on.
Stop pressing the button when the desired temperature is displayed. Temperature range is 61⁰F
-
90⁰F.
Press the
▲
button to increase the temperature when the unit is on. Stop pressing the button when the
desired temperature is displayed. Temperature range is 61⁰F
-
90⁰F.
4. FAN
-
Press the FAN button to turn on the fan mode.
FAN HIGH –Press this button to set the fan speed to high. Can be used in COOL or FAN mode.
FAN MED –Press this button to set the fan speed to medium. Can be used in COOL or FAN mode.
FAN LOW –Press this button to set the fan speed to low. Can be used in COOL or FAN mode.
5. SLEEP MODE
-
Sleep mode can be activated under Cool mode, Dry mode, Auto mode, and Fan mode.
Press the SLEEP button on the remote control, When in SLEEP mode, the fan will run on low to keep
fan noise at a minimum. The temperature setting will gradually increase to 2°F above the original set
temperature for each of first 2 hours. The unit will keep operating the same temperature until the sleep
mode is turned off.
6. ENERGY SAVER (On by default)
-
Press the ENERGY SAVER button to turn off and on the Energy
Saver mode. When the unit is in Energy Saver mode, the energy saver light will turn on. Selecting En-
ergy Saver mode will cycle the fan off and on with the compressor to limit energy consumption. Only
available in COOL mode. Use this feature when the room is unoccupied and a greater range of room
temperature is acceptable.
7. TIMER
-
Press the TIMER button when the unit is off to set up the Auto
-
on timer. The hour indicator
on the digital display will start flashing. Press the Timer button to set timer within 1
-
24 hours.
Press the TIMER button when the unit is on to set up the Auto
-
off timer. The hour indicator on the dig-
ital display will start flashing. Press TIMER button to set timer within 1
-
24 hours. To cancel the timer,
press the TIMER button repeatedly until the timer mode is off.
8. °C
/
°F
-
Press the °C /°F button to switch the temperature between Celsius and Fahrenheit.
9. MYTEMP MODE
-
Press the MYTEMP MODE button to change the thermostat sensor from the air
conditioner to the remote location. When MYTEMP MODE is activated, double hyphen sign "
--
" will
flash 3 seconds on digital display. The air conditioner will cool the area depending on the location and
set temperature of the remote control. Take the remote control with you so the air conditioner cools the
room to your location.
10. CHILD LOCK
-
Press this button to lock/unlock the remote control buttons.
