11
OPERATING THE UNIT USING THE CONTROL PANEL
Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
button on the control panel.
4) Press the Mode button until the “
” icon appears on the Multi-color display
5) Press the
▲
or
▼
buttons until the desired room temperature appears on the control panel
display. The temperature ranges from 61
°
F - 88
°
F (16
°
C - 31
°
C).
6) Select the desired fan speed by pressing the
FAN SPEED
button.
NOTE:
During hot days, the unit will cool the room most efficiently by setting the temperature at the lowest
setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the exhaust hose and
window kit, and keeping direct sunlight to a minimum will also improve the cooling efficiency.
NOTE
:
When the unit is running on cooling mode, the exhaust hoses are required and must be
vented outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hoses and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the
POWER
Button on the control panel.
4) Press the
MODE
button until the “
” appears on the control panel display.
NOTE:
The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly during
the dehumidification. Keep the windows and doors closed to aid the effectiveness of the unit in removing the
moisture from the room.
NOTE
:
When the unit is running in dehumidifier mode, the exhaust hoses are required and must
be vented outside using the supplied window kit.
NOTE:
The unit will not perform in dehumidifier mode when the room temperature is lower than 61
°
F .
Fan Mode
1) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the
POWER
button on the control panel.
3) Press the
MODE
button until the “
” icon appears on the control panel display.
4) Select the fan speed by pressing the
FAN SPEED
button.
5) To circulate more air, press the
SWING
button on the remote control. The louvers will oscillate in our
exclusive
WAVEFLO
® pattern; back and forth and up and down, spreading more air throughout the
room.
NOTE:
It is not necessary for the exhaust hoses and window kit to be installed to operate the unit in fan mode.
