#
WINDOW KIT INSTALLATION
FOR SINGLE HOSE AIR CONDITIONER
The venting kit must be installed in order for the unit to work correctly in the air conditioner mode dehumid mode.
The venting kit should not be used while the unit is fanning.
The window kit has been designed to fit into most vertical and horizontal window openings.
Close the window tightly. Your portable air condi-
tioner is good to go.
Open the window or door to adjust the length of the window kit to
fit the opening. If necessary, mark the kit and cut one end down to
properly fit he opening.
Note: Use the least amount of Exhaust Hose length as possible to
maximize efficiency.
Note:
The unit above may differ from the unit described in the manual, the
above directions and images show general directions for Soleus Air single
hose Portable Air Conditioner.
Connect the Exhaust Hose
over the hot air exhaust
opening
Exhaust Hose
This side up
Window Kit Adapter
Exhaust Host
Window Kit
Attach the Exhaust Hose to the
Window Kit Adapter, attach the
Window Kit Adpater to the
Window Kit.
Exhaust Hose
Note:
When using the venting system, keep the Exhaust Hose as straight
as possible. The Exhaust Hose can be shortened, but it is not recom-
mended to increase the length of the Exhaust Hose. DO NOT use an ex-
tension cord with your portable air conditioner.
Exhaust Hose
Air Exhaust Cover
Press the recessed points on
each side of the Air Exhaust
Cover and remove the
Exhaust Hose horizontally.