GPS mini
Step 2) Charging the Battery:
Charge the unit for at least 4.5 hours before first use. The length of time for a fully charged
battery will last depending on the actual usage. It is recommended to regularly re-charge your
battery every 1-2 months even if it is not used to maintain good battery condition.
2.1)
Plug your Watch to your PC USB port.
2.2)
Make sure the contact pins of the watch are properly connected to your PC.
Note: Please thoroughly dry the charging contacts and surrounding area to ensure proper
electrical contact and prevent corrosion.
When the battery is low, it is time to charge the watch.
Battery low condition:
You cannot turn ON the GPS when the battery is low. The watch will display LOW BATT. You
need to recharge the battery in order to use the GPS again.
When the battery is almost low and you still perform your exercise, your data may not be
saved. Please make sure the battery have enough battery power before doing your exercise
in order not to lose your data.
Step 3) Configure your Watch:
Before using your watch, please set your Watch.
3.1)
Go to
SET
mode and set the following parameters:
AUTO LAP
,
TIME
,
UNITS
,
USER
,
NIGHT
,
Contrast, CHIME, ALARM, and VIEW.
•
Press S1 or S11 to change the values of the blinking digit.
•
Press S5 to enter and set the selected parameter.
•
The watch will auto exit setting mode if there is no push button operation in 3 to 4
minutes.
How to set the AUTOLAP:
•
Auto Lap setting range: 0.4, 1, 2, 3, 4, 5, and OFF
How to set the TIME:
•
Year range: 2001 to 2099
•
Total of 36 city codes are available for various Time zones.
•
Time can be displayed in 12 hour or 24 hour format
•
Dual time zone Time 1 and Time 2
Summary of Contents for GPS mini
Page 12: ...GPS mini ...
