5
ASSEMBLY INSTRUCTIONS
Estimated assembly time: Approximately 5 minutes
Remove the fan and packaging materials from the box.
Remove the mounting nut from the motor shaft.
Position the back grille over the motor shaft, aligning the
holes in the back grille with the two knobs that pro-
trude from the motor. Make sure the handle is at
the top.
Secure the back grille by screwing on the mounting nut.
Turn clockwise and tighten firmly.
Slide the fan blade onto the mounting shaft with the shaft
sleeve facing the motor. Align securing screw with
flat groove in the motor shaft and tighten with Phil-
lips screwdriver.
Position front grille so logo is horizontal. Secure the top
tab to the back grille. Snap the two remaining metal
clips to complete the assembly.
