6
TIMER
The fan can be programmed to automatically shut-off after a set period of time. The
timer can be set for 30 minute increments. The maximum programmed time is 12 hours.
Once the timer reaches 0:00, the fan will automatically shut-off. To start the Timer,
press the
TIMER
button on the control panel or the supplied remote. Each press of the
TIMER
button will increase the timer by 30 minutes. Press the
TIMER
button until the
desired time is visible on the multi-color display. To quickly set the timer, hold down the
TIMER
button until the desired time is visible on the control panel.
CLOCK
When the fan is not operating, the timer will stay on in clock mode. Once the clock is
set, the display will show the current time when the fan is off. To set the clock, turn the
fan off and then press the
SPEED
button until the correct hour is visible on the display.
To set the minutes press the
TIMER
button until the correct minutes are visible on the
display. The fan will keep the correct time as long as it is plugged-in. If the fan is
unplugged, or there is a power-loss, the clock will reset to 0:00. To quickly set the clock,
simply hold down the
SPEED
and
TIMER
buttons (separately) on the control panel until
the current hour and minutes are shown on the display.
CLEANING/MAINTENANCE
Turn the fan off and unplug the unit.
Clean the tower fan, pedestal, and base using a dry cloth.
Never use abrasive cleaning agents or solvents. This may cause damage or
deterioration to the surface of the unit.
Do not immerse the fan in any form of liquid. Do not allow water to drip on or into
the fan motor housing.
STORAGE
When not in use, store the fan in a cool, dry location. To prevent dust and dirt build-up,
use the original packaging to repack the unit.
