background image

25. 

SAVE THESE INSTRUCTIONS.

24. The heater is not to be used in wet or moist locations. 

23. DO NOT locate against walls or behind drapes or

22. CAUTION: Use supply wires suitable for 105

 3 

PRODUCT INFORMATION & SPECIFICATIONS 

Reflective heating technology replicates the sun’s healthy rays, directly warming the object or person in front 
of the heater. As the temperature of the heated surface rises, the warming effect is felt throughout the air and 
surrounding areas. Reflective heaters are great for open or large rooms, and actually save you energy by warm-
ing objects and not the entire room.  
Reflective heating is both safe and healthy– it produces no odors, chemicals, or fumes, and doesn’t stir up dust. 
As a safety feature, the heater’s exterior does not get as warm to reduce the risk of burns from anyone or any-
thing touching the heater while in use. Remarkably efficient, our heater uses less power to create the same 
amount of heat as traditional heaters. Equipped with safety tip-over switch and overheat auto-off, our heater is 
safe and reliable. 

 

 

 

 

DISCLAIMER 

ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE 
PRESENTATION OF THE MANUFACTURER.  SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT 
TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN.

 

 
 
 
 

12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, ex-

plosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open 
flames. 

13. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. 

However, if you have to use an extension cord, the cord shall be 

No14

.AWG minimum size and rated 

not less than 

1875W

14. To avoid fire or shock hazard, plug the unit directly into a 120  V AC electrical outlet. 
15. To disconnect heater, turn controls to OFF, then remove plug from outlet. Pull firmly on the plug, DO 

NOT unplug by pulling on the cord. 

16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 
17. Use only for intended household use as described in this manual. Any other use not recommended by 

the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not rec-
ommended or sold by unauthorized dealers may cause hazards. 

18. Always use on a dry, level surface. 
19. DO NOT use outdoors. 
20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state 

speed control device. 

21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will 

void your warranty. The inside of the unit contains no user serviceable parts. Qualified personnel 
should perform all servicing only. 

℃.

 

 furniture when it is free-standing used.  

 

Voltage Rating 

120 V (60Hz) 

Power Consumption  800W on High, 400W on Low 

Unit Size 

10.8” W x 7.87” D x 21.3” H  

Unit Weight 

4.15 lbs 

Summary of Contents for 3077997








Reviews: