background image

 

14

 

WARRANTY 

ONE YEAR LIMITED WARRANTY 

 

Soleus International Inc. warrants the accompanying Soleus Air KY-36 portable Air Conditioner to be free of defects in material 
and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original 

retail purchase in the United States or Canada. 

 

If the air conditioner exhibits a defect in normal use, Soleus International Inc. will, at its option, either repair or replace it, free of 
charge within a reasonable time after the air conditioner is returned during the warranty period. 

 
As a condition to any warranty service obligation, the consumer must present this Warranty Certificate along with a copy of the 
original purchase invoice. 

 

THIS WARRANTY DOES NOT COVER: 

 

1)  Damage, accidental or other wise, to the air conditioner while in the possession of a consumer not caused by a defect 

in material or workmanship; 

2)  Damage caused by consumer misuse, tampering, or failure to follow the care and special handling provisions in the 

instructions. 

3)  Damage to the finish of the case, or other appearance parts caused by wear. 
4) Filter. 

5)  Damage caused by repairs or alterations of the air conditioner by anyone other than authorized by Soleus International 

Inc.. 

6)  Freight and Insurance cost for the warranty service. 

 
ALL IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY ARE LIMITED TO 
ONE-YEAR DURATION OF THIS EXPRESS LIMITED WARRANTY.    SOLEUS INTERNATIONAL INC. DISCLAIMS ANY 
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES AND IN NO EVENT SHALL SOLEUS INTERNATIONAL 
INC.’S LIABILITY EXCEED THE RETAIL VALUE OF THE AIR CONDITIONER FOR BREACH OF ANY WRITTEN OR 
IMPLIED WARRANTY WITH RESPECT TO THIS AIR CONDITIONER 

 
 

 

 

 

 

Summary of Contents for 000 BTU Evaporative Portable Air Conditioner and 14















Reviews: